DetectChangesSchedule PP
Name (hardcoded) | Value (user defined / technical). |
---|---|
Detect Changes Every [min] | Defines how often the detect changes job should run. |
Last Execution Timestamp | Technical field. Timestamp of the last execution. Do not change if not instructed. |
The CF ProcessApprovalProductInMonitor is the "heartbeat" of the scheduling. It runs every 60 minutes by default. If you need a more frequent trigger, you can reduce it to 5 minutes in the CF scheduling configuration. It is not recommended to reduce it below 5 minutes due to technical restrictions. With the Detect Changes Every Parameter you can "skip" execution of this task and reduce it to e.g. once every 24 hours.