Manual Override

You can edit a new or existing simulation by doing the following:

1. Select the simulation and click the 'View/Edit Details'  icon.
2. Check the simulated price and, if needed, override it in the 'Manual Override' column. Also, values that have the attribute 'Allow override' set in the calculation logic can be changed manually. The values will then be calculated again. All changes are saved automatically.
3. Click the 'Back' button to return to the simulations list.
   

Company Parameters Change

You can change the Company Parameters for the simulation. Go to the Company Parameters section and then do the following:

1. Select the Company Parameters.
2. Copy the selected parameters by clicking the 'Copy'  icon.
3. Change the new Company Parameter's status from 'Inactive' to 'Simulation Only'.
4. Optionally define a 'Simulation Set' (e.g. "Best Case").
5. Change the required values of the Company Parameter.
6. Repeat until all the Company Parameters to be used in the simulation have been changed.

Calculation Logic Change

You can define the specific calculation logic for the simulation. Open the Calculation Logic section and do the following:

1. Select the calculation logic you want to use for the simulation.
2. Copy the selected calculation logic by clicking the 'Copy'  icon.
3. Change the status of the calculation logic from 'Inactive' to 'Simulation Only'.
4. Optionally define a 'Simulation Set' (e.g. "Best Case").
5. Change the required values of the calculation logic.
   

 The simulation will use all Company Parameters and price logics with the status 'Active' for which no equivalent with status 'Simulation Only' can be found.